The ultimate frame protection tape!

Completely protect and seal your new or existing deck frame or timber structure with Deck Tape. Protected from water/moisture rot and frame weathering.

The most common area for deck frame weather damage is where the joists are exposed between the boards. This tape is designed to be applied along the top of the joists before the boards are applied to eliminate this issue. It is manufactured from a strong polymer acrylic adhesive, giving a completely water-proof weather-resistant solution from -40C to +93C with no cracking, peeling or strength loss.

With a 25-year guarantee, this massively adds to the life of your deck frame and has been tested with all timber treatments. Additionally, it is repositionable for the first 30 minutes (it will cure after 1-4 hours total of 72 hours). It increases the timber’s lifespan to the same guarantee as most composite deck boards and hardwood deck board manufacturers.

It also doesn’t stick to itself during installation to avoid any wastage. When screws are fixed through it, it seals around the hole to ensure there are no areas where moisture can get through.

Please make sure you have measured these correctly as we cut the tape, especially to your requirements - hence we cannot accept returns.

Please note: This product is sold per metre. Please enter your required meterage in the quantity box. 

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Length: Please enter
• Width: 50mm
• Material: Polymer acrylic adhesive

• UV stable
• Extremely strong
• Can be applied to wet & below freezing
• Self-sealing around screws
• 25-year warranty

For use only as a wood preservative. 

Joist End Grain Sealer is a clear penetrating preserver formulated to protect against attack by wood-rotting fungi. 

Please note: Image is for illustration purposes only.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Clear

• Two coats are recommended

Don’t let the weed growth ruin the beauty of your garden.

Weed Membrane stops weed growth while allowing water and nutrients to penetrate the soil underneath.

This heavy-duty ground cover is puncture-resistant and ideal for use on rough ground and under footpaths or driveways.

Our Heavy Duty Weed Control Fabric is a great weed suppressant and suitable for gardens, flower beds, footpaths, and driveways.

It also has planting lines incorporated into the material to facilitate accurate planting. Made from tightly woven black polypropylene, this weed membrane is UV-resistant and can be used without a cover.

Using weed control fabric significantly reduces the need for chemical weed killers while being safe to use and very easy to install.

If you would like any more information on this product, please call the number at the top of this page and speak to our super-efficient sales team now!

• Width: 2m
• Length: 10m
• Weight: 100gsm
• Material: Polypropylene

• SUPER HEAVY DUTY - 100gsm Strong and durable woven polypropylene for maximum weed prevention
• POROUS - Water permeable allowing raindrops or plant feed/water to drain through
• UV STABILISED - To protect from exposure from direct sunlight
• VERSATILE - Use under pathways, driveways, decking, plant beds, for landscaping, etc
• Planting lines

The Predator Jet PU Work Gloves are lined with a 13 gauge seamless Polyester liner and have a Polyurethane palm coating.

These gloves utilise a breathable back to prevent sweating and are also incredibly lightweight, comfortable and dexterous – “the perfect general handling glove”.

To select the correct glove size, simply measure across your palm at the point indicated in the last picture on this listing. Then compare your measurement with the chart below to ensure you select the correct glove size for your hand.

Where your measurement falls on the boundary of two sizes, we recommend selecting the larger of the two sizes for a comfortable fit.

However, if you specifically want your gloves to be a closer fit for work that requires fine movements, select the smaller of the two sizes.

9 - Medium: 8.5cm – 9cm

10 - Large: 9.5cm – 10cm

Browse our full range of tools and PPE online for other competitive deals.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now.

• Size: 10 / L

• 13 gauge seamless polyester liner
• Polyurethane palm coating
• Breathable back
• Lightweight, comfortable and dexterous
• Elasticated cuff

Well-balanced saw with a solid blade for fast and efficient cross and rip cutting in medium-thick wood materials.

It cuts on the push and pull.

Very reliable and accurate handsaw.

If you would like any more information on this product, please call the number at the top of this page and speak to our super-efficient sales team now!

• Brand: Bahco
• Length (Imperial): 22 "
• Manufacturer Guarantee: 1 Year Guarantee
• Product Height: 150 mm
• Product Length: 559 mm
• Product Thickness: 25 mm
• Teeth Per Inch (TPI): 7 tpi
• Total Product Weight: 0.4 kg

• Medium cut
• Universal hard-point teeth
• Double-ground
• No minimum order

Standard wood screws, ideal for most situations!

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Size: 100mm
• Box size: 100

• Zinc plated
• No minimum order

Flexible joist hanger manufactured from pre-galvanised mild steel.

A quick and safe method of joist trimming for light, medium, and heavy-duty applications.

Please Note: Image for illustration purposes only.

If you would like any more information on this product, please call the number at the top of this page and speak to our super-efficient sales team now!

• Size: 47mm
• Material: Galvanised steel

• Flexible
• Will suit timbers from 50mm up to 150mm
• No minimum order

These DeWalt PZ2 screwdriver bits are designed for professional use. They provide a high-quality screwing action attached to your power drill and have a hardened bit core for extra strength & durability and are especially suited for repetitive screw-driving tasks.

The flexible torsion zone on each bit absorbs stress caused by excessive tightening, reducing breakages. The extra definition on the driver ends means you can avoid wear and rounding on the heads as you drive your screws home.

The extra-thick construction of each bit stops the shuddering that would otherwise disrupt your drill action as you work. These bits have optimised tip geometry with less than 4 degrees of movement for precise rotation in use. 

You can use them with magnetic holders for easy changes and a secure hold in your drill. The 25 pieces come in a hard plastic container to keep them together and well protected during transit and storage

Browse our full range of tools and accessories online for other competitive deals.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Length: 25mm
• Pack Size: 25
• Screw Bit Fitting: Phillips (PZ)
• Tip Size: PZ2

• Supplied in DeWalt 'Tough Case'
• Extra-thick construction